DJI Mic Mini 2 Series
Key Features:
- Compact, Versatile & Discreet
- Three Voice Tone Presets
- High-Quality Audio, Stable Transmission
- Two-Level Active Noise Cancellation
- 48-Hour Extended Operating Time & Power Saving
- Direct Bluetooth Connection to Smartphone
DJI Mic Mini 2 is a compact wireless mic with multi-color magnetic covers to match most outfits. Three voice tone presets, mixed device connection and DJI OsmoAudio deliver high-quality audio. Long battery life and all-in-one storage let you create with ease. DJI Mic Mini 2 works with cameras, smartphones (USB-C/Lightning or Bluetooth) and computers. It also supports the DJI OsmoAudio ecosystem, connecting directly to Osmo Pocket 3, Osmo 360, Osmo Nano, and Osmo Action 6 without a receiver.
Compact, Versatile & Discreet
Weighs approximately 11 g (excluding magnetic clip and magnet). Supports magnetic attachment and clip-on wearing. Magnetic clip is detachable and rotatable (4 directions: up, down, left, right) for optimal audio capture. Comes standard with Obsidian Black and Glaze White magnetic front covers. DJI Mic Mini 2 Charging Case stores 2× Transmitters, 1× Receiver (or Mobile Receiver), 2× Windscreens, 2× Magnetic Clips, 2× Magnets, and audio cables — all accessories in one case. The new Charging Case (1 TX + 1 Mobile RX) is designed specifically for mobile recording workflows. Supports up to two transmitters with one receiver. The DJI Mic Mini Receiver connects two DJI Mic Mini or Mic Mini 2 transmitters. The DJI Mic Series Mobile Receiver supports cross-model mixing in blue light mode (Mic Mini 2, Mic 3, Mic Mini, Mic 2).
-
Three Voice Tone Presets
- Professional tuning with three presets: Regular (balanced, clear, full tone), Bright (enhanced highs, transparent sound), Rich (boosted lows, solid sound without muddiness). Set via DJI Mimo app. Default: Regular.
-
High-Quality Audio, Stable Transmission
- 48 kHz / 24-bit wireless audio. Transmission range: up to 400 m with Mic Mini Receiver; up to 300 m with Mobile Receiver (green light mode); up to 200 m (blue light / mixed mode). Faithfully reproduces sound details across multiple sources.
-
Two-Level Active Noise Cancellation
- Basic level: indoor use, reduces fan/AC/reverb noise with minimal vocal loss. Strong level: outdoor use, significantly reduces background noise. Set via DJI Mimo app or Mobile Receiver noise-cancel switch (O / L / H). When connected directly to phone, defaults to Strong.
-
48-Hour Extended Operating Time & Power Saving
- Transmitter: 11.5 hrs per charge. Receiver: 10.5 hrs per charge. Fully charged Charging Case recharges 2× transmitters + 1× receiver 3.6× times. Quick charge: 5 minutes = approx. 1 hour of use. Auto power-saving: enters sleep mode when no receiver signal detected.
-
Automatic Limiting to Prevent Audio Clipping
- Automatically reduces gain when volume is too high to prevent clipping. Enabled by default when using with Mic Mini Receiver or Mobile Receiver. Cannot be disabled when transmitter connects directly to smartphone via Bluetooth.
-
DJI OsmoAudio™ Direct Connection
- Transmitter connects directly to Osmo Pocket 3, Osmo 360, Osmo Nano, and Osmo Action 6 via DJI OsmoAudio™ (no receiver needed). Can also trigger start/stop recording on supported devices remotely.
-
Wide Compatibility
- Compatible with cameras (3.5mm TRS), smartphones, computers, and tablets. Auto power on/off in sync with connected camera. Plug-free audio playback when connected to smartphone. Simultaneous charging of phone and receiver via USB-C passthrough.
-
DJI Mimo App – Parameter Adjustment & Firmware Update
- Full parameter control via DJI Mimo app: voice tone presets, noise cancellation level, low cut, safety track, gain adjustment, auto power-off. Firmware updates supported for both transmitter (via Bluetooth) and receiver (via USB-C).
-
Mono & Stereo Recording + Safety Track
- Supports Mono (M), Stereo (S), and Mono + Safety Track (Ms) modes. In Ms mode, main track at normal volume and backup track at −6 dB to prevent clipping in high-volume situations.
-
Low Cut Filter
- When enabled via DJI Mimo app, attenuates sounds below 100 Hz for cleaner audio capture. Disabled by default. Not available when transmitter connects directly to phone.
-
Auto Power-Off
- Separate auto power-off settings for transmitter and receiver via DJI Mimo app. If no connection is detected for more than 15 minutes, both will power off automatically.
-
Direct Bluetooth Connection to Smartphone
- Transmitter connects directly to smartphone via Bluetooth for recording in third-party camera apps. Firmware updates and basic parameter adjustments available via DJI Mimo app while connected.